2 in 1 Top Hat DIN Rail Roll Forming Machine

2 in 1 Top Hat DIN Rail Roll Forming Machine

BELIEVE INDUSTRY COMPANY is experienced in designing and building metal roll forming machines. This 2 in 1 DIN rail roll forming machine can produce 2 sizes of top hat section rails in 1 machine. Main material applicable are the cold rolled galvanized steel coils with 0.8-1.5mm thickness. Besides the top hat type, which also known as Omega type, we can make machine for producing C section rails and G section rails based customers' requirement. 

Top Hat Type Rail Drawing 

This drawing is for reference only, final design will be based on customers' profile drawings and requirement. 

1. Material Type: cold rolled steel coils, galvanized steel coils, 235-345Mpa

2. Material Thickness: 0.8-1.5mm

3. Coil Width: as per customers' profile drawing

Machine Layout and Work Flow Chart

Work Flow: Decoiling and leveling ---> servo feeding and punching ---> feeding and guiding ---> roll forming---> cutting into length ---> collecting

Main Technical Parameters:

1. Decoiler: 2Ton decoiler / 3Ton decoiler decoiler

2. Levelling unit: 7-roller decoiler, 1.5kw for levelling

3. Punching unit: hydraulic punching unit, 11kw for punching

4. Material of punching molds: Cr12Mov, HRC58-62

5. Roll forming steps: 14 steps

6. Material of shafts: 40Cr, 70mm in diameter, HB220-260

7. Material of rollers: GCr15, HRC58-62

8. Power for roll forming: 7.5kw

9. Line speed: 6-8m/min

10. Drive and transmission: electrically motor drive via chain and sprockets

11. Cutting type: hydraulic cutting after roll forming

12. Cutting power: 5.5kw

13. Material of cutting molds: Cr12Mov, HRC58-62

14. Cutting length tolerance: +/-1.5mm

15. Control system: PLC control system, Panasonic brand

If you need more machine information, please contact us directly.