2 in 1 Metal Sheet Roll Forming Machine for Tile Effect Roof Panel and Trapezoidal Sheet

Double Layer Roll Forming Machine

Double layer roll forming machine has two sets of roll forming units, and each layer runs individually to produce a different sheet for roof or wall cladding. Believe Industry Company offers double layer roll formers for corrugated roof/wall sheets, trapezoidal (rib profile, box profile) roof/wall sheets, tile effect roof panels, etc. 

2 in 1 Metal Sheet Roll Forming Machine for Tile Effect Roof Panel and Trapezoidal Sheet 

This 2 in 1 metal sheet machine has 2 layers. Upper layer is designed to produce tile effect roof panels and under layer to produce trapezoidal sheets used for both roof and wall cladding. The two roll forming layers share the machine base, electric motor and hydraulic cutting system. 

Main Components of the Metal Sheet Roll Forming Line

Main Components: 

5Ton Uncoiler, feeding guide, roll forming unit, hydraulic stamping unit(for tile effect panels), hydraulic cutting system, collecting table

Working Flow:

Coil unwinding -- feeding and guiding -- roll forming -- stamping -- cutting to length -- final product collecting

                                                                                        For Reference Only

The Most Important Technical Specifications

Decoiler

5Ton Hydraulic Decoiler

1. Decoiler capacity: 5000kgs (6Ton decoilerand 8Ton decoiler is optional)

2. Decoiler Type: 4kw electric feeding; 3kw hydraulic expanding and tensioning (mechanic/manual decoiler is optional)

3. Coil Innner Diameter: 450mm - 520mm

Main roll forming unit

1. Roller stations:

   * Upper layer: 16 stations for tile profile;

   * Under layer: 20 stations for plain roofing profile 

2. Main power: 5.5KW for roll forming

3. Material of rollers: No.45 steel, Chromed with 0.05mm thickness

4. Shaft Material: 75mm in diameter; 40Cr with heat treatment, chromed with 0.05mm thickness

5. Drive and transmission: electrically motor drive with chain transmission

6. Roll forming speed: 15m/min (not including stamping & cutting)

7. Control system: PLC control system (Siemens, Panasonic and other famous brand is optional)

Hydraulic stamping & cutting unit

1. Hydraulic power: 7.5kw for stamping tile steps and cutting

2. Material of cutting blade: Cr12 Mov, HRC58-62

3. Cutting type: hydraulic powered cutting; stop cutting

4. Cutting to length: operated via touch screen as required

Finished Products For Reference 

Tile Effect Panels                                                                                                    Roof & Wall Sheet

If you need detailed machine specifications, please let us know more about your requirments.